Trend Large Lock Jig

"Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately. Suitable for DDA (Disabilty Discrimination Act) lock size. 20mm x 235mm radius end face plate, 24mm x 235mm radius end face plate and 17mm x 170mm mortise. Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG). Suitable for doors 34mm to 58mm thick. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Suits DIN style locks.

Specifications:
• Door thickness min.=34 mm
• Door thickness max.=58 mm
• Metric (D x OL)=Template
• 20 x 235mm (RE)=1
• 24 x 235mm (RE)=2
• Rounded ends (RE)
• Mortise Lock Dimensions
• Metric (D x OL)=Template
• 17 x 170mm*=A
• *Mortise is actually 180mm to give 5mm clearance each end.

Contents:
• 1 x Guide bush collar
• 2 x Face plate template
• 1 x Mortise template
• 1 x Template adapter
• 6 x Spacer Fingers"