This transparent, versatile sealant is perfect for smoothing any cracks around your home.
Note: the Helpline telephone number relating to DIY.com shown on this product is incorrect. Please dial 0333 014 3098 for all Helpline enquiries.
Technical Specifications
Application conditions
Dry
Application method
Cartridge gun
Base
Silicone-based
CE marked
Yes
Container type
Cartridge
Drying time
24 h
Flexible
Flexible
Instructions for storage
Store in dry conditions between +5°C and +25°C.
Instructions for use
Completely remove any existing sealant and residue. Then, thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove the nozzle cap and trim the nozzle diagonally to fit the joint width. Screw the nozzle into the cartridge and insert the cartridge into a cartridge gun. Pull the trigger to apply sealant into the joint and ensure that the sealant has good contact with both sides of the joint. Then smoothen the sealant with a sealant finishing tool within 5 minutes. It is recommended to use this in a well-ventilated area
Location
Interior & exterior
Pack quantity
1
Paintable
No
Product weight (kg)
351
Resistant to moisture
Yes
Resistant to mould
Mould resistant
Resistant to ultraviolet
Yes
Resistant to water
Water-resistant once fully cured
Solvent-free
Solvent-free
Standard
EN 15651-1, EN 15651-3
VOC emissions class in indoor air
C
VOC level
Low
Volume (L)
0.3
You might be interested in Similar Products
White Silicone-based General-purpose Sealant, 300ml