White Silicone-based General-purpose Sealant, 300ml
Product information
Guarantee - Statutory
Included: Includes 1 standard cartridge and 1 nozzle
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
General-purpose
Features and benefits
This versatile, durable sealant is perfect for bathrooms and kitchens.
Mould resistant and waterproof
Note: the Helpline telephone number relating to DIY.com shown on this product is incorrect. Please dial 0333 014 3098 for all Helpline enquiries
Technical Specifications
Application conditions
Dry
Application method
Cartridge gun
Base
Silicone-based
CE marked
Yes
Container type
Cartridge
Drying time
24 h
Flexible
Flexible
Instructions for storage
Store in dry conditions between +5°C and +25°C.
Instructions for use
Completely remove any existing sealant and residue. Then, thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove the nozzle cap and trim the nozzle diagonally to fit the joint width. Screw the nozzle into the cartridge and insert the cartridge into a cartridge gun. Pull the trigger to apply sealant into the joint and ensure that the sealant has good contact with both sides of the joint. Then smoothen the sealant with a sealant finishing tool within 5 minutes. It is recommended to use this in a well-ventilated area