Flomasta Plastic Ball Float valve Bottom entry ½"
Flomasta Plastic Ball Float valve Bottom entry ½" - B&Q for all your home and garden supplies and advice on all the latest DIY trends
Product Description
Product information
- Manufacturer guarantee - 5 years
- Connection size: 12.7mm
- Remove cotter pin from float arm and fit arm to valve body. Push cotter pin through locating holes and ensure arm operates plunger via float level adjuster screw. Fit ball valve. Hand tighten the back nut and with a spanner, tighten a further three-quarter turn. Do not over tighten. Fit suitable ball float to thread on end of float arm. Check anti-siphon assembly is held securely by retaining nut. Turn on water supply. Allow cistern or tank to fill. Adjust water level by rotating the float level adjuster screw. The screw operates the plunger which opens and closes the valve. When correct water level is achieved, lock the adjusting screw in position by tightening hexagonal nut.
Features and benefits
½" bottom-entry plastic thread fill valve suitable for use with close-coupled toilets. Designed with silent fill technology
- Reduces noisy cistern refills compared to a standard fill valve, helping to keep disturbance to a minimum
- Suitable for use with both high and low pressure systems
- Giving confidence that this is the right product for any type of system
- Fully complies with all local market regulatory standards, ensuring the quality of the product
- This standard bottom entry valve is tested to 200,000 cycles
- This product fills a toilet quietly
Technical Specifications
- Arm length (mm)
- 170
- Connection size (mm)
- 12.7
- Connection size (imperial) (inch)
- 0.5
- Inlet position
- Bottom
- Material
- Plastic
- Model name/number
- F-F-1052
- Pack quantity
- 1
- Product height (mm)
- 305
- Product width (mm)
- 45
- Specific Material
- Plastic
- Standard
- BS 1212
- Valve type
- Ball
- Water regulations
- WRAS approved
You might be interested in Similar Products
Flomasta Brass & plastic Bottom entry Fill valve, ½"
from £10.44
Flomasta Ecofill Brass & plastic Bottom entry Fill valve, ½"
from £16.32
Flomasta Plastic Float Fill valve
from £6.81
Flomasta Brass Side entry Float Fill valve, ½"
from £10.49
Flomasta Brass Side entry Float Fill valve, ½"
from £12.59
Flomasta Brass & plastic Side entry Fill valve, ½"
from £9.78
Flomasta Plastic Ball float (Dia)110mm 5/16"
from £3.66
Flomasta Plastic Cylindrical Ball float (Dia)90mm 5/16"
from £3.14
Fluidmaster Brass & plastic Bottom entry Fill valve, ½"
from £18.09
Flomasta Brass, plastic & rubber 6 piece Bottom Fill valve pack ½"
from £16.47
Torbeck Bottom Entry Fill Valve with Plastic Tail
from £9.78
Fluidmaster Side Entry Float Valve
from £5.45
Fluidmaster Brass Float valve Side entry ½"
from £11.98
Fluidmaster Brass Float valve Side entry ½"
from £9.98
Fluidmaster Plastic Float Fill valve
from £14.58
Torbeck Side Entry Ball Valve
from £7.85
Fluidmaster Brass & plastic Side entry Fill valve, ½"
from £17.98
Jollyfill Universal 3/8' Telescopic Inlet Valve Bottom Entry Fill - Wirquin
from £26.99
Angled Double Shut-off Heater Valve Bottom Water Entry Downside Inlet
from £23.99
Staright Double Shut-off Heater Valve Bottom Water Entry Downside Inlet
from £20.99