Fluidmaster Brass & plastic Side entry Fill valve, ½"
Fluidmaster Brass & plastic Side entry Fill valve, ½" - B&Q for all your home and garden supplies and advice on all the latest DIY trends
Top Sellers (4)
£33.97
Go to shop
£17.98
Go to shop
£14.04
Go to shop
£17.98
Go to shop
Product Description
Product information
- Manufacturer guarantee - 5 years
- Comes with Instruction manual
- Turn off water supply. Disconnect pipe work and remove old valve. Place inner washer onto threaded shank then install new valve through cistern or tank hole. Place outer washer onto shank outside cistern or tank then thread back nut onto threaded shank to enable tap connector to fit neatly to avoid cross threading. When position is correct, before tightening back nut, reconnect water supply to valve, making sure washer is seated correctly. Tighten tap connector 1/4 turn past hand tight with spanner (do not over tighten). Now tighten back nut with spanner 1/4 turn past hand tight (do not over tighten). Turn on water supply. Adjust float until water level is as marked on inside of cistern or tank. If overflow pipe is at same level as supply line, adjust water level to approximately 25mm (1 inch) below overflow pipe. Turn float adjustment rod clockwise to raise and anti-clockwise to lower water level. Turn on water supply.
- Fittings & fixings included
Features and benefits
This side entry 1/2" fill valve is suitable for use with close coupled toilets. It has a high quality brass thread and silent fill technology
- Silent fill - Ends noisy cistern refills, helping to keep disturbance to a minimum for all the family both day and night
- Adjustable - Has an adjustable height for easy fit across of different cistern sizes
- Brass thread - High quality material that reduces the risk of cross threading and damage to the valve
- Tested to 200000 cycles - To ensure the durability and quality of the valve
- Suitable for use with both high and low pressure systems - Giving confidence that this is the right product for any type of system
- (Water supply certification) WRAS certified - Fully complies with all local market regulatory standards, ensuring the quality of the product
Technical Specifications
- Connection size (imperial) (inch)
- 0.5
- Inlet position
- Side
- Material
- Brass, Metal, Plastic
- Minimum operating pressure (bar)
- 0.1
- Model name/number
- 49088-0001
- Pack quantity
- 1
- Product depth (mm)
- 135
- Product height (mm)
- 220
- Product weight (kg)
- 230
- Product width (mm)
- 55
- Specific Material
- Brass & plastic
- Standard
- BS 1212
- Suitable water pressure
- High or low pressure
- Water regulations
- WRAS approved
You might be interested in Similar Products
Fluidmaster Brass & plastic Bottom entry Fill valve, ½"
from £18.09
Flomasta Brass & plastic Side entry Fill valve, ½"
from £9.78
Fluidmaster Brass Float valve Side entry ½"
from £11.98
Fluidmaster Brass Float valve Side entry ½"
from £9.98
Fluidmaster Plastic Float Fill valve
from £14.58
Fluidmaster Side Entry Float Valve
from £5.45
Flomasta Brass Side entry Float Fill valve, ½"
from £10.49
Flomasta Brass Side entry Float Fill valve, ½"
from £12.59
Flomasta Brass & plastic Bottom entry Fill valve, ½"
from £10.44
Fluidmaster Plastic & rubber 2 piece Side Flush & fill valve pack ½"
from £21.99
Fluidmaster Pro 75B Side Entry Valve
from £22.62
Flomasta Ecofill Brass & plastic Bottom entry Fill valve, ½"
from £16.32
Torbeck Bottom Entry Fill Valve with Plastic Tail
from £9.78
Flomasta Plastic Float Fill valve
from £6.81
Flomasta Brass, plastic & rubber 6 piece Bottom Fill valve pack ½"
from £16.47
Torbeck Side Entry Ball Valve
from £7.85
Jollyfill Universal 3/8' Telescopic Inlet Valve Bottom Entry Fill - Wirquin
from £26.99
Fluidmaster Rubber Valve Washer
from £3.99
Jollyfill Universal 1/2' BSP Telescopic Inlet Valve Bottom Entry Fill - Wirquin
from £26.99
Flomasta Plastic Ball Float valve Bottom entry ½"
from £9.27