Name: Flomasta Ecofill Brass & plastic Bottom entry Fill valve, ½"
Brand: Flomasta
SKU: 3663602420262
Price: 16.32 GBP
Availability: InStock

Flomasta Ecofill Brass & plastic Bottom entry Fill valve, ½" - B&Q for all your home and garden supplies and advice on all the latest DIY trends

Trade Point

Flomasta Ecofill Brass & plastic Bottom entry Fill valve, ½"

Flomasta Ecofill Brass & plastic Bottom entry Fill valve, ½"

in stock

£16.32

Go to shop

Flomasta Ecofill Brass & plastic Bottom entry Fill valve, ½"

Product information

Manufacturer guarantee - 5 years
Comes with Instruction manual
Take the filling valve and loosen the height adjusting nut anti-clockwise. The overall height of the valve can now be altered by simply adjusting the telescopic column. Push together to shorten, or pull apart to lengthen the valve. Important note: The filter, together with the high or low flow restrictor is accommodated inside the end of the grooved telescopic column and is easily removed/exchanged by fully extracting the column and withdrawing with pliers. To set the valve to the correct length either use the old valve as a guide, or fit the new valve and adjust in position. When satisfied, make sure the collet has ‘clicked’ into position in the chosen groove, and lock column into position by tightening nut, hand tight only. Fit the filling valve ensuring the black washer is on the inside of the tank. Hand tighten the nut and with a spanner, tighten a further three-quarter turn. Do not over-tighten. Connect water supply using a spigot type connector. Turn on water supply. Allow the cistern or tank to fill. The required water level is achieved by adjusting the level of the float, by means of the adjusting screw. By twisting the adjusting screw, the float is raised or lowered as appropriate. Observe the valve is functioning correctly and shutting off when the required water level is achieved. After the valve has shut off there may be a slight dripping from the cap, this is a necessary part of the valve function. Setting the delayed fill chamber is done by sliding the chamber up the outlet tube. Allow the valve to shut off, now slide the chamber up so that the top of the chamber is approximate 15mm below the water level.

90mm height adjustment with adjustable float

Features and benefits

Silent fill - Ends noisy cistern refills, helping to keep disturbance to a minimum for all the family both day and night
Adjustable - Has an adjustable height for easy fit across of different cistern sizes
Brass thread - High quality material that reduces the risk of cross threading and damage to the valve
Tested to 200000 cycles - To ensure the durability and quality of the valve
Suitable for use with both high and low pressure systems - Giving confidence that this is the right product for any type of system
(Water supply certification) WRAS certified - Fully complies with all local market regulatory standards, ensuring the quality of the product
Delayed entry - The delayed entry fill on this valve allows the cistern to empty before replacing with fresh water, reducing the water wastage
Anti-syphon - Prevents water contamination

Connection size (imperial) (inch): 0.5
Inlet position: Bottom
Material: Metal, Brass, Plastic
Minimum operating pressure (bar): 0.1
Model name/number: F-F-1035
Pack quantity: 1
Product height (mm): 315
Product width (mm): 65
Specific Material: Brass & plastic
Suitable water pressure: High or low pressure
Water regulations: WRAS approved