DeWalt DCN692 18v XR Cordless Brushless Framing Nail Gun - No Batteries, No Charger, No Case

The DeWalt DCN692 18v XR 90mm Framing Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its brushless motor delivers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods. The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time. The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener. Specifications • Battery chemistry: XR Li-Ion • Voltage: 18v • Nail Diameter: 2.8 - 3.3 mm • Magazine angle: 30 - 34 ° • Magazine loading: Rear - load • Nail Length: 50 - 90 mm • Magazine capacity: Up to 55 Nails • Trigger Type: Bump & Sequential • Length: 345 mm • Width: 125 mm • Height: 338 mm • Weight: 4.1 kg • Nailer Operating Mode: Selective • Integrated Belt Hook: Yes • Jam Clearing: Yes • Temperature Range: -20 to 50°C • Fault indicator: Yes

Features & Benefits
• 18v XR Li-Ion Two Speed Framing Nailer • Brushless motor for increased runtime • Two speeds - or power levels - to optimise the nailer for all lengths of nails • Quicker readiness to fire, less recoil and more durability when firing short nails • Delivers enough power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods • Sequential operating mode allows for precision placement • Bump operating mode provides the user with production speed • Mechanical operation offers consistant performance between -20 and 50 degrees celcius • Minimal cleaning/service requirements • Class leading vibration and sound figures • Versatile 30 - 34 degree magazine angle • Accepts most clipped head, and off centre round head paper tape or wire weld collated framing nails • Reversable belt/rafter hook povides increased portability and versatility on the job-site • Depths can be easily adjusted using the thumb wheel depth adjuster • Non-marring contact tip prevents unintentional damage to workpiece • Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud • Gas free operation offers a significant saving in running costs • Tool free stall/jam clearance minimises user down time • Cordless design allows you to work without the inconvenience and safety risk of trailing leads • User can engage contact trip lock-off to prevent accidental discharge of fasteners • Dry fire lockout ensures that the tool is protected from firing without nails in the magazine

Contents
• DCN692N 18v Framing Nailer • Belt / Rafter Hook • No Battery • No Charger • No Case