Osmo UV Protection Oil Oak 750ml 425

CLEAR PROTECTION FOR VERTICAL STRUCTURES

All exterior woods grey into a patina colour over time, but UV-Protection Oil has been developed to maintain the wood's natural colour and slow the greying process by (UV factor) 12 times in comparison to untreated wood.

Ideal for windows, doors, cladding, fencing and other vertically structured joinery (not recommended on flat surfaces such as decking).

Natural oil-based and microporous finish does not crack, flake, peel or blister. Water and dirt resistant, moisture regulating and reduces wood swelling and shrinkage.

INFORMATION

Approx. coverage: 18m²/L with one coat

No. of coats: 2

Application temperature: +5°C to 35°C

Drying time: 12hrs.

Sizes: 0.125L, 0.750L, 2.5L

RECOMMENDED

Oak

Beech

Ash

Alder

Birch

Thermowood and Thermally Modified Timber (TMT) is prone to grey very fast and therefore application is recommended within the first two weeks after processing. Decking-Oil 010 Thermowood is optically suitable.

Accoya® application of WR Base Coat is recommended before use.

Kebony® application of WR Base Coat is recommended before use.

Pine application of WR Base Coat is recommended before use.

Spruce application of WR Base Coat is recommended before use.

Douglas Fir application of WR Base Coat is recommended before use.

RECOMMENDED AFTER A WEATHERING PERIOD

Cedar new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Iroko new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Mahogany new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Teak new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Walnut new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Ipe new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Merbau new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Wenge new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Rosewood new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Sycamore new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Pressure-Impregnated Pine new or sanded, requires at least approx. 12 weeks exposure to the exterior elements before application.

Sapele new or sanded, requires at least approx. 3-4 weeks exposure to the exterior elements before application.

Larch new or sanded, requires at least approx. 2 weeks exposure to the exterior elements before application.

Other ingredient-rich hardwood species, in new or sanded condition, requires a varied period of exposure to the exterior elements before application. Please enquire for further information.

After the weathering period, it is generally recommended to de-grey the surface with Osmo Wood Reviver Power-Gel and clean the surface from the extractive content before application, always trial apply!