Andrea


<p>It is clear that mould on walls or mould on windows is not desirable in a house. Mould is harmful to health, not only for those with allergies. It most commonly causes breathing problems, asthma, allergies, skin issues, as well as headaches and sleep problems. The fact is that the main cause of mould growth is excessive moisture in the apartment. Typically, this is a problem for older houses, but it can also occur in apartments in panel houses or new buildings (the so-called sick building syndrome).</p>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2023/05/Untitled-design-30.webp" alt="how to get rid of mould" class="wp-image-4604" width="548" height="308"/></figure>



<p>Whether you already have mould on the walls (often in the corners of the room and around windows) or you are concerned about mould and want to take preventive measures, the key is to ventilate the room. The ideal humidity in the apartment is 40-60%, when it is higher, it becomes a problem. You can use a home hygrometer to measure the air humidity. High air humidity is often indicated by condensation on windows, and you may feel it in the air.</p>



<p>In general, it is also true that moisture and mould thrive in colder apartments. So if you are trying to save heating costs these days and not heating some rooms at all, high humidity and subsequent mould growth can be a consequence.</p>



<h2>Tips for Reducing Humidity and Ventilating Your Flat</h2>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2023/05/Untitled-design-31.webp" alt="" class="wp-image-4606" width="591" height="332"/></figure>



<p>To reduce the humidity in your apartment and thus limit mould on the walls, you need to ventilate properly. In the summer, it&#8217;s best to leave the ventilation open (at least with a micro-ventilation), and in the winter, ventilate several times a day, briefly and intensively, for example, by opening the windows in the room wide open for 5 minutes.</p>



<p>Other preventive measures include drying clothes in a dryer or outside, using an extractor fan when cooking (ideally a few minutes before you start cooking), and using a fan in the bathroom when showering or bathing (if there is a window, be sure to properly ventilate the bathroom afterwards).</p>



<h2>How to get rid of mould on walls without chemicals</h2>



<p>The basis for prevention is proper ventilation and humidity reduction. However, if you already have mould on the walls, it&#8217;s appropriate to treat the affected area with an anti-mould spray (then ventilate thoroughly again). This typically reliably removes small patches of mould in room corners. If you want to avoid stronger chemicals, you can use the following remedies, some of which our grandmothers used against mould &#8211; bleach, vinegar, ammonia, baking soda, hydrogen peroxide, or borax solution.</p>



<p><strong>However, the key is to solve the cause of mould growth.</strong></p>



<h2>When to get a dehumidifier</h2>



<p>If you follow the tips above regarding ventilation, drying laundry, using an extractor fan, and bathroom fan, and yet the humidity in your flat remains high, it&#8217;s time to get a household dehumidifier. You can choose between condensing or desiccant dehumidifiers.</p>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2023/05/Screenshot-2023-05-02-at-16.26.50.webp" alt="" class="wp-image-4607" width="422" height="480"/><figcaption><a href="https://buildiro.com/product/7332857500963/Wood-S-10l-Dehumidifier-Mrd10" target="_blank" rel="noreferrer noopener">Wood&#8217;s 10L Dehumidifier Mrd10</a></figcaption></figure>



<p>Condensing <a href="https://buildiro.com/product/3663602459255/Blyss-0-3l-Dehumidifier">dehumidifiers</a> are the most common choice, where air passes through the device, and the water from the air is condensed and collected in a tank (which can hold several litres of water during the day). Dehumidifiers can also be equipped with filters against mould and dust, thus purifying the air. They are mobile devices, so you can move them around the flat according to your needs.</p>



<p>When choosing a dehumidifier, you need to consider the size of the rooms you will be dehumidifying, air humidity, indoor temperature, and noise level. Modern dehumidifiers have a timer and offer several usage modes, for example, they can run continuously until the set air humidity is reached or even intelligently select the optimal air humidity depending on the current temperature in the room.</p>



<h2>Summary</h2>



<p>This blog post highlights the health risks of mould in homes, including breathing problems, allergies, and sleep issues. The main cause of mould growth is excessive moisture, which can be found in older houses and even new buildings. To prevent mould, it is crucial to maintain proper ventilation and humidity levels (40-60%) in your home. Tips for reducing humidity include proper ventilation, drying clothes outdoors or in a dryer, using extractor fans while cooking, and using a bathroom fan when showering. If mould is already present, it can be treated with anti-mould spray or natural remedies like bleach or vinegar. If humidity remains high despite following these tips, consider investing in a dehumidifier, which can help maintain ideal humidity levels and even filter out mould and dust particles.</p>
<div class="saboxplugin-wrap" itemtype="http://schema.org/Person" itemscope itemprop="author"><div class="saboxplugin-tab"><div class="saboxplugin-gravatar"><img src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2022/10/Screenshot-2022-10-28-at-23.04.15.png" width="100"  height="100" alt="" itemprop="image"></div><div class="saboxplugin-authorname"><a href="https://buildiro.com/magazine/author/olivia/" class="vcard author" rel="author" itemprop="url"><span class="fn" itemprop="name">Andrea</span></a></div><div class="saboxplugin-desc"><div itemprop="description"><p>Andrea is a garden and DIY enthusiast. She always comes up with great ideas and the latest trends in the interior or outdoor design.</p>
</div></div><div class="clearfix"></div></div></div>

It is clear that mould on walls or mould on windows is not desirable in a house. Mould is harmful to health, not only for those with allergies. It most commonly causes breathing problems, asthma, allergies, skin issues, as well as headaches and sleep problems. The fact is that the main cause of mould growth is excessive moisture in the apartment. Typically, this is a problem for older houses, but it can also occur in apartments in panel houses or new buildings (the so-called sick building syndrome).







Whether you already have mould on the walls (often in the corners of the room and around windows) or you are concerned about mould and want to take preventive measures, the key is to ventilate the room. The ideal humidity in the apartment is 40-60%, when it is higher, it becomes a problem. You can use a home hygrometer to measure the air humidity. High air humidity is often indicated by condensation on windows, and you may feel it in the air.



In general, it is also true that moisture and mould thrive in colder apartments. So if you are trying to save heating costs these days and not heating some rooms at all, high humidity and subsequent mould growth can be a consequence.



Tips for Reducing Humidity and Ventilating Your Flat







To reduce the humidity in your apartment and thus limit mould on the walls, you need to ventilate properly. In the summer, it&#8217;s best to leave the ventilation open (at least with a micro-ventilation), and in the winter, ventilate several times a day, briefly and intensively, for example, by opening the windows in the room wide open for 5 minutes.



Other preventive measures include drying clothes in a dryer or outside, using an extractor fan when cooking (ideally a few minutes before you start cooking), and using a fan in the bathroom when showering or bathing (if there is a window, be sure to properly ventilate the bathroom afterwards).



How to get rid of mould on walls without chemicals



The basis for prevention is proper ventilation and humidity reduction. However, if you already have mould on the walls, it&#8217;s appropriate to treat the affected area with an anti-mould spray (then ventilate thoroughly again). This typically reliably removes small patches of mould in room corners. If you want to avoid stronger chemicals, you can use the following remedies, some of which our grandmothers used against mould &#8211; bleach, vinegar, ammonia, baking soda, hydrogen peroxide, or borax solution.



However, the key is to solve the cause of mould growth.



When to get a dehumidifier



If you follow the tips above regarding ventilation, drying laundry, using an extractor fan, and bathroom fan, and yet the humidity in your flat remains high, it&#8217;s time to get a household dehumidifier. You can choose between condensing or desiccant dehumidifiers.



Wood&#8217;s 10L Dehumidifier Mrd10



Condensing dehumidifiers are the most common choice, where air passes through the device, and the water from the air is condensed and collected in a tank (which can hold several litres of water during the day). Dehumidifiers can also be equipped with filters against mould and dust, thus purifying the air. They are mobile devices, so you can move them around the flat according to your needs.



When choosing a dehumidifier, you need to consider the size of the rooms you will be dehumidifying, air humidity, indoor temperature, and noise level. Modern dehumidifiers have a timer and offer several usage modes, for example, they can run continuously until the set air humidity is reached or even intelligently select the optimal air humidity depending on the current temperature in the room.



Summary



This blog post highlights the health risks of mould in homes, including breathing problems, allergies, and sleep issues. The main cause of mould growth is excessive moisture, which can be found in older houses and even new buildings. To prevent mould, it is crucial to maintain proper ventilation and humidity levels (40-60%) in your home. Tips for reducing humidity include proper ventilation, drying clothes outdoors or in a dryer, using extractor fans while cooking, and using a bathroom fan when showering. If mould is already present, it can be treated with anti-mould spray or natural remedies like bleach or vinegar. If humidity remains high despite following these tips, consider investing in a dehumidifier, which can help maintain ideal humidity levels and even filter out mould and dust particles.
AndreaAndrea is a garden and DIY enthusiast. She always comes up with great ideas and the latest trends in the interior or outdoor design.

Beat mould in your home! Discover ventilation tips, natural remedies, and dehumidifier advice for a healthy, mould-free living space. 🏠💨🍃

How to Get Rid of Mould in a Room

Luke


<p>The advantage of modern dry construction in today&#8217;s world is that there is a solution for almost all levels of humidity. The problem lies only in choosing the appropriate material for a specific environment, as there are many real-life situations. The specific board material is theoretically chosen for constructions depending on the intensity of moisture exposure in the given environment. The good news is that KNAUF has several system solutions prepared for this purpose, which are capable of completely covering the needs of the construction.</p>



<h2>Plasterboards for regular bathrooms with humidity up to 75%</h2>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2023/04/Untitled-design-22.webp" alt="plasterboard for damp enviroments" class="wp-image-4589" width="771" height="433"/><figcaption>&#8220;Green&#8221; plasterboard is best for most common bathrooms</figcaption></figure>



<p>In a typical bathroom with normal usage patterns, there is considerable moisture exposure, but usually not long-term. To be specific, the humidity in such a bathroom reaches 75% sometimes even 100%. However, if it does not exceed a period of two hours, there is nothing to worry about if we choose the impregnated Knauf Core Board together with impregnated jointing compounds (such as Uniflott Imprägniert) for the construction. The characteristic of this board with impregnated cardboard is its ability to absorb moisture up to a maximum of 10% of its weight. So it is really resistant even in such an environment. The second alternative is to choose the Knauf DIAMANT board, which excels in other criteria such as acoustic or fire-resistant properties, as well as strength and hardness.</p>



<h2>Board for extreme moisture exposure</h2>



<figure class="wp-block-image size-large"><img loading="lazy" width="508" height="330" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2023/04/Screenshot-2023-04-30-at-15.17.15.webp" alt="aquapanel " class="wp-image-4590"/><figcaption>Aquapanel Knauf</figcaption></figure>



<p>When you need to be absolutely sure that the construction will withstand even in a room that will be exposed to almost 100% humidity or water splashing, and reliable intensive ventilation is not possible, you have only one option &#8211; a cement-based board. Knauf AQUAPANEL (INDOOR or OUTDOOR) is a 100% waterproof board that can withstand intensive moisture exposure. In addition to not swelling and being dimensionally stable in damp conditions, this board is resistant to mold and can be safely used outdoors in the OUTDOOR variant. AQUAPANEL is a uncompromising solution with a high level of reliability. It finds practical use in wellness centers, pools, hospitals, public showers, and similar places. This board is also easy to work with as it can be cut with a knife and attached with self-tapping screws.</p>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2023/04/Untitled-design-23.webp" alt="" class="wp-image-4591" width="742" height="417"/><figcaption>Aquapanel is directly suitable for use in wellness centers</figcaption></figure>



<h2>Example from practice: Unventilated ceiling above the shower area in the bathroom</h2>



<figure class="wp-block-image size-large"><img loading="lazy" width="650" height="278" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2023/04/Screenshot-2023-04-30-at-15.21.31.webp" alt="" class="wp-image-4592"/><figcaption>An additional solution to the problem of mould in the bathroom of an apartment with poor ventilation in the shower area is a new ceiling with Knauf AQUAPANEL board, which completely eliminates the mould growth. Source: Ceskestavby.cz</figcaption></figure>



<p>For a traditional family bathroom, it is recommended to use DRYSTAR or even <a href="https://buildiro.com/product/4260021862117/Knauf-Aquapanel-Floor-Tile-Underlay-1200mm-X-900mm-X-6mm" target="_blank" rel="noreferrer noopener">AQUAPANEL</a> instead of the GREEN board in the ceiling above the shower area. This is an area where humidity during showering exceeds the specified limit of 75%. If the space under the ceiling is not intensively ventilated because there is no fan, or it is inappropriately placed (sometimes even 10 to 15 cm away from the edge of the ceiling), then there is intense concentration and long-term exposure to humidity. In the case where only an impregnated board is used in the ceiling, it will not be damaged, but there is a risk of mold formation. The solution is simple. Use Knauf DRYSTAR or AQUAPANEL board in the construction of the ceiling above the shower area with the same dimensions as the shower area. There is no need to worry about connection problems with the rest of the construction, where GREEN boards are used again. However, be aware that whether the choice is DRYSTAR or AQUAPANEL, its surface must be fully skimmed. The increase in the cost of bathroom construction for this solution is negligible.</p>



<h2>Summary</h2>



<p>Moisture-resistant plasterboards are a solution for buildings that are exposed to high humidity levels, such as bathrooms, kitchens, and wellness centers. Plasterboards like Knauf GREEN, DRYSTAR, and DIAMANT are suitable for use in damp environments. Cement-based boards, such as Knauf AQUAPANEL, are recommended for extreme moisture exposure or areas where intensive ventilation is not possible. Unventilated ceilings above shower areas can be prone to mold formation if the wrong type of board is used. Choosing the right type of moisture-resistant plasterboard depends on the specific environment and level of moisture exposure. Knauf offers various system solutions that are capable of meeting the needs of the construction, ensuring reliability and durability.</p>
<div class="saboxplugin-wrap" itemtype="http://schema.org/Person" itemscope itemprop="author"><div class="saboxplugin-tab"><div class="saboxplugin-gravatar"><img src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2022/10/Screenshot-2022-10-30-at-16.46.22.png" width="100"  height="100" alt="" itemprop="image"></div><div class="saboxplugin-authorname"><a href="https://buildiro.com/magazine/author/luke-p/" class="vcard author" rel="author" itemprop="url"><span class="fn" itemprop="name">Luke</span></a></div><div class="saboxplugin-desc"><div itemprop="description"><p>Luke is the founder of Buildiro.com and he is passionate about construction and building. His mission is to show people how to make things done fast and easy.</p>
</div></div><div class="clearfix"></div><div class="saboxplugin-socials "><a target="_self" href="https://www.linkedin.com/in/luke-polach-b863305b/" aria-label="Linkedin" rel="nofollow noopener" class="saboxplugin-icon-grey"><svg aria-hidden="true" class="sab-linkedin" role="img" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 448 512"><path fill="currentColor" d="M100.3 480H7.4V180.9h92.9V480zM53.8 140.1C24.1 140.1 0 115.5 0 85.8 0 56.1 24.1 32 53.8 32c29.7 0 53.8 24.1 53.8 53.8 0 29.7-24.1 54.3-53.8 54.3zM448 480h-92.7V334.4c0-34.7-.7-79.2-48.3-79.2-48.3 0-55.7 37.7-55.7 76.7V480h-92.8V180.9h89.1v40.8h1.3c12.4-23.5 42.7-48.3 87.9-48.3 94 0 111.3 61.9 111.3 142.3V480z"></path></svg></span></a></div></div></div>

The advantage of modern dry construction in today&#8217;s world is that there is a solution for almost all levels of humidity. The problem lies only in choosing the appropriate material for a specific environment, as there are many real-life situations. The specific board material is theoretically chosen for constructions depending on the intensity of moisture exposure in the given environment. The good news is that KNAUF has several system solutions prepared for this purpose, which are capable of completely covering the needs of the construction.



Plasterboards for regular bathrooms with humidity up to 75%



&#8220;Green&#8221; plasterboard is best for most common bathrooms



In a typical bathroom with normal usage patterns, there is considerable moisture exposure, but usually not long-term. To be specific, the humidity in such a bathroom reaches 75% sometimes even 100%. However, if it does not exceed a period of two hours, there is nothing to worry about if we choose the impregnated Knauf Core Board together with impregnated jointing compounds (such as Uniflott Imprägniert) for the construction. The characteristic of this board with impregnated cardboard is its ability to absorb moisture up to a maximum of 10% of its weight. So it is really resistant even in such an environment. The second alternative is to choose the Knauf DIAMANT board, which excels in other criteria such as acoustic or fire-resistant properties, as well as strength and hardness.



Board for extreme moisture exposure



Aquapanel Knauf



When you need to be absolutely sure that the construction will withstand even in a room that will be exposed to almost 100% humidity or water splashing, and reliable intensive ventilation is not possible, you have only one option &#8211; a cement-based board. Knauf AQUAPANEL (INDOOR or OUTDOOR) is a 100% waterproof board that can withstand intensive moisture exposure. In addition to not swelling and being dimensionally stable in damp conditions, this board is resistant to mold and can be safely used outdoors in the OUTDOOR variant. AQUAPANEL is a uncompromising solution with a high level of reliability. It finds practical use in wellness centers, pools, hospitals, public showers, and similar places. This board is also easy to work with as it can be cut with a knife and attached with self-tapping screws.



Aquapanel is directly suitable for use in wellness centers



Example from practice: Unventilated ceiling above the shower area in the bathroom



An additional solution to the problem of mould in the bathroom of an apartment with poor ventilation in the shower area is a new ceiling with Knauf AQUAPANEL board, which completely eliminates the mould growth. Source: Ceskestavby.cz



For a traditional family bathroom, it is recommended to use DRYSTAR or even AQUAPANEL instead of the GREEN board in the ceiling above the shower area. This is an area where humidity during showering exceeds the specified limit of 75%. If the space under the ceiling is not intensively ventilated because there is no fan, or it is inappropriately placed (sometimes even 10 to 15 cm away from the edge of the ceiling), then there is intense concentration and long-term exposure to humidity. In the case where only an impregnated board is used in the ceiling, it will not be damaged, but there is a risk of mold formation. The solution is simple. Use Knauf DRYSTAR or AQUAPANEL board in the construction of the ceiling above the shower area with the same dimensions as the shower area. There is no need to worry about connection problems with the rest of the construction, where GREEN boards are used again. However, be aware that whether the choice is DRYSTAR or AQUAPANEL, its surface must be fully skimmed. The increase in the cost of bathroom construction for this solution is negligible.



Summary



Moisture-resistant plasterboards are a solution for buildings that are exposed to high humidity levels, such as bathrooms, kitchens, and wellness centers. Plasterboards like Knauf GREEN, DRYSTAR, and DIAMANT are suitable for use in damp environments. Cement-based boards, such as Knauf AQUAPANEL, are recommended for extreme moisture exposure or areas where intensive ventilation is not possible. Unventilated ceilings above shower areas can be prone to mold formation if the wrong type of board is used. Choosing the right type of moisture-resistant plasterboard depends on the specific environment and level of moisture exposure. Knauf offers various system solutions that are capable of meeting the needs of the construction, ensuring reliability and durability.
LukeLuke is the founder of Buildiro.com and he is passionate about construction and building. His mission is to show people how to make things done fast and easy.

Learn about moisture-resistant plasterboards like Knauf GREEN, DRYSTAR, and AQUAPANEL that can be used in damp environments, and how to choose the right one.

Plasterboard for damp environments. Which one to use?


<figure class="wp-block-image size-large is-resized"><img loading="lazy" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2022/12/Untitled-design-13.webp" alt="" class="wp-image-4270" width="632" height="355"/></figure>



<p>Keeping your home clean and well-maintained is not always easy, but it is an important task that should not be overlooked. Cleaning your extractor fan filter is one of the most effective ways to avoid dirt and grease build-up in the kitchen, while also ensuring that air is efficiently circulated throughout the room. If you are looking for an easy and quick way to clean your <a href="https://buildiro.com/category/extractor-fans">extractor fan</a> filter, then this guide is for you! In this step-by-step guide, you will learn how to clean your filter in minutes with no hassle. From the preparation process to the actual cleaning, this guide will provide you with all the necessary information you need to make sure your filter is clean and well-maintained. So, let&#8217;s get started and learn how to clean your extractor fan filter in minutes!</p>



<h2>Preparing the Extractor Fan Filter</h2>



<p>The first step to cleaning your extractor fan filter is to prepare the filter for cleaning. In order to do so, follow these steps: First, unplug the fan from the socket. Next, wear rubber gloves when handling the filter. This is to ensure that the filter does not get damaged by your hands. Then, remove the filter from the extractor fan. If you cannot remove the filter from your fan, then it probably is a sealed filter. This means that the filter cannot be removed. In such a case, clean the filter by putting it in a sealable bag with water and dishwashing liquid. Let the filter soak in the bag for a few hours. Afterwards, remove the bag and clean the filter with a soft sponge. The last step is to dry the filter before putting it back in the fan. This way, you will be able to clean the filter without damaging it.</p>



<h2>Removing the Filter</h2>



<p>The next step in cleaning your extractor fan filter is to remove the filter from the fan. Again, if the filter is a sealed filter and cannot be removed, follow the instructions above to clean the filter without removing it. For fans with removable filters, remove the filter carefully by following these steps: First, lift the filter from its place. Then, put the filter upside down so that all the dirt and grease do not fall back into the fan. Next, place the filter on the floor or a table. You can also put the filter in a sealable bag if you want to contain the dirt inside the bag. This way, you will be able to clean the filter without disturbing the dirt inside the fan.</p>



<h2>Cleaning the Filter</h2>



<figure class="wp-block-image size-large is-resized"><img loading="lazy" src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2022/12/Untitled-design-12.webp" alt="extractor fan cleaning filter" class="wp-image-4271" width="695" height="390"/></figure>



<p>Next, you have to clean the filter. This is the most important part of cleaning your extractor fan filter. Follow these steps: First, put the filter in water and dishwashing liquid. Soak the filter in the water and let it sit undisturbed for a few hours. This is to ensure that the filter absorbs enough water to clean it properly. After a few hours, remove the filter from the water and clean it with a soft sponge. In addition to cleaning the filter, this process also helps you gauge the level of filth that the filter has collected. If the sponge is too dirty after cleaning the filter, then it means that the filter is extremely dirty and in need of replacement. After cleaning the filter, dry it using a dry cloth. Make sure the filter is completely dry before putting it back in the fan. This is because moisture might damage the motor of your fan. Finally, put the filter back in the fan and plug it in. The filter will now be clean and ready to filter the air in your home!</p>



<h2>Reinstalling the Filter</h2>



<p>After cleaning the filter, you now have to reinstall the filter back in the fan. This is a simple process, and you just have to follow these steps: First, place the filter back in its place. Then, put the filter in its original place. If the filter is a sealed filter and cannot be moved, then put the bag with the filter in a new place where the air can circulate properly. Finally, plug in the extractor fan and switch it on. This way, you will be able to clean the filter and get it back in the fan within minutes.</p>



<h2>Final Tips</h2>



<p>Throughout this guide, you have learned how to clean your extractor fan filter easily and effectively. However, before you start cleaning your filter, make sure that you clean the surrounding area as well. This is to prevent the dirt and grease that you clean from falling back into the area. You can use a vacuum to clean the area. Alternatively, you can also use a cloth to clean the area with water and dishwashing liquid. Make sure the cloth is not too wet so that you do not damage the area. After cleaning the surrounding area, start cleaning the filter. Another important thing to keep in mind is to clean your filter regularly. This way, you will be able to prevent the filter from getting extremely dirty and avoid replacing the filter. Lastly, you can also clean your filter with other cleaning methods. However, you should always start with the method described above to make sure that your filter gets cleaned properly.</p>



<h2>Conclusion</h2>



<p>Cleaning your extractor fan filter regularly is a great way to keep your home clean and well-maintained. However, cleaning the filter can be a daunting task, especially if you do not know the right way to do it. Luckily, this guide has all the information you need to clean your filter quickly and easily. So, make sure to use this guide to clean your extractor fan filter in minutes!</p>
<div class="saboxplugin-wrap" itemtype="http://schema.org/Person" itemscope itemprop="author"><div class="saboxplugin-tab"><div class="saboxplugin-gravatar"><img src="https://storage.googleapis.com/buildiro-web-app.appspot.com/1/2022/10/Screenshot-2022-10-30-at-16.46.22.png" width="100"  height="100" alt="" itemprop="image"></div><div class="saboxplugin-authorname"><a href="https://buildiro.com/magazine/author/luke-p/" class="vcard author" rel="author" itemprop="url"><span class="fn" itemprop="name">Luke</span></a></div><div class="saboxplugin-desc"><div itemprop="description"><p>Luke is the founder of Buildiro.com and he is passionate about construction and building. His mission is to show people how to make things done fast and easy.</p>
</div></div><div class="clearfix"></div><div class="saboxplugin-socials "><a target="_self" href="https://www.linkedin.com/in/luke-polach-b863305b/" aria-label="Linkedin" rel="nofollow noopener" class="saboxplugin-icon-grey"><svg aria-hidden="true" class="sab-linkedin" role="img" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 448 512"><path fill="currentColor" d="M100.3 480H7.4V180.9h92.9V480zM53.8 140.1C24.1 140.1 0 115.5 0 85.8 0 56.1 24.1 32 53.8 32c29.7 0 53.8 24.1 53.8 53.8 0 29.7-24.1 54.3-53.8 54.3zM448 480h-92.7V334.4c0-34.7-.7-79.2-48.3-79.2-48.3 0-55.7 37.7-55.7 76.7V480h-92.8V180.9h89.1v40.8h1.3c12.4-23.5 42.7-48.3 87.9-48.3 94 0 111.3 61.9 111.3 142.3V480z"></path></svg></span></a></div></div></div>

Keeping your home clean and well-maintained is not always easy, but it is an important task that should not be overlooked. Cleaning your extractor fan filter is one of the most effective ways to avoid dirt and grease build-up in the kitchen, while also ensuring that air is efficiently circulated throughout the room. If you are looking for an easy and quick way to clean your extractor fan filter, then this guide is for you! In this step-by-step guide, you will learn how to clean your filter in minutes with no hassle. From the preparation process to the actual cleaning, this guide will provide you with all the necessary information you need to make sure your filter is clean and well-maintained. So, let&#8217;s get started and learn how to clean your extractor fan filter in minutes!



Preparing the Extractor Fan Filter



The first step to cleaning your extractor fan filter is to prepare the filter for cleaning. In order to do so, follow these steps: First, unplug the fan from the socket. Next, wear rubber gloves when handling the filter. This is to ensure that the filter does not get damaged by your hands. Then, remove the filter from the extractor fan. If you cannot remove the filter from your fan, then it probably is a sealed filter. This means that the filter cannot be removed. In such a case, clean the filter by putting it in a sealable bag with water and dishwashing liquid. Let the filter soak in the bag for a few hours. Afterwards, remove the bag and clean the filter with a soft sponge. The last step is to dry the filter before putting it back in the fan. This way, you will be able to clean the filter without damaging it.



Removing the Filter



The next step in cleaning your extractor fan filter is to remove the filter from the fan. Again, if the filter is a sealed filter and cannot be removed, follow the instructions above to clean the filter without removing it. For fans with removable filters, remove the filter carefully by following these steps: First, lift the filter from its place. Then, put the filter upside down so that all the dirt and grease do not fall back into the fan. Next, place the filter on the floor or a table. You can also put the filter in a sealable bag if you want to contain the dirt inside the bag. This way, you will be able to clean the filter without disturbing the dirt inside the fan.



Cleaning the Filter







Next, you have to clean the filter. This is the most important part of cleaning your extractor fan filter. Follow these steps: First, put the filter in water and dishwashing liquid. Soak the filter in the water and let it sit undisturbed for a few hours. This is to ensure that the filter absorbs enough water to clean it properly. After a few hours, remove the filter from the water and clean it with a soft sponge. In addition to cleaning the filter, this process also helps you gauge the level of filth that the filter has collected. If the sponge is too dirty after cleaning the filter, then it means that the filter is extremely dirty and in need of replacement. After cleaning the filter, dry it using a dry cloth. Make sure the filter is completely dry before putting it back in the fan. This is because moisture might damage the motor of your fan. Finally, put the filter back in the fan and plug it in. The filter will now be clean and ready to filter the air in your home!



Reinstalling the Filter



After cleaning the filter, you now have to reinstall the filter back in the fan. This is a simple process, and you just have to follow these steps: First, place the filter back in its place. Then, put the filter in its original place. If the filter is a sealed filter and cannot be moved, then put the bag with the filter in a new place where the air can circulate properly. Finally, plug in the extractor fan and switch it on. This way, you will be able to clean the filter and get it back in the fan within minutes.



Final Tips



Throughout this guide, you have learned how to clean your extractor fan filter easily and effectively. However, before you start cleaning your filter, make sure that you clean the surrounding area as well. This is to prevent the dirt and grease that you clean from falling back into the area. You can use a vacuum to clean the area. Alternatively, you can also use a cloth to clean the area with water and dishwashing liquid. Make sure the cloth is not too wet so that you do not damage the area. After cleaning the surrounding area, start cleaning the filter. Another important thing to keep in mind is to clean your filter regularly. This way, you will be able to prevent the filter from getting extremely dirty and avoid replacing the filter. Lastly, you can also clean your filter with other cleaning methods. However, you should always start with the method described above to make sure that your filter gets cleaned properly.



Conclusion



Cleaning your extractor fan filter regularly is a great way to keep your home clean and well-maintained. However, cleaning the filter can be a daunting task, especially if you do not know the right way to do it. Luckily, this guide has all the information you need to clean your filter quickly and easily. So, make sure to use this guide to clean your extractor fan filter in minutes!
LukeLuke is the founder of Buildiro.com and he is passionate about construction and building. His mission is to show people how to make things done fast and easy.

Keeping your home clean and well-maintained is not always easy, but it is an important task that should not be overlooked. Cleaning your extractor fan filter is one of the most effective ways to avoid dirt and grease build-up in the kitchen, while also ensuring that air is efficiently circulated throughout the room. If you are looking for an easy and quick way to clean your extractor fan filter, then this guide is for you!

A Step-by-Step Guide on How to Clean Extractor Fan Filter in Minutes

extractor-fans &#8211; Buildiro Magazine

alias

CategoryPageCategoriesQuery

CategoryList_categories

CategoryBar_categories

Categories_categories

productCategoryTree

uuid

depth

name

description

faq_items

parent

L1PageCategory_category

L2PageCategory_category

onlyValid

productCategoryTreeAll

children

image_url

additional_html

query CategoryPageCategoriesQuery(
  $alias: String!
) {
  ...CategoryList_categories
  ...CategoryBar_categories
  ...Categories_categories
  productCategoryTree(alias: $alias) {
    uuid
    depth
    name
    description
    alias
    faq_items {
      question
      answer
    }
    parent {
      name
    }
    ...L1PageCategory_category
    ...L2PageCategory_category
  }
}

fragment Categories_categories on Query {
  productCategoryTreeAll(onlyValid: true) {
    alias
    name
    children {
      alias
      name
      children {
        alias
        name
        children {
          alias
          name
          children {
            alias
            name
            children {
              alias
              name
              children {
                alias
                name
              }
            }
          }
        }
      }
    }
  }
}

fragment CategoryBar_categories on Query {
  productCategoryTreeAll(onlyValid: true) {
    alias
    name
  }
}

fragment CategoryBox_category on ProductCategoryTree {
  name
  alias
  uuid
  image_url
  children {
    uuid
    alias
    name
  }
}

fragment CategoryGrid_categories on ProductCategoryTree {
  children {
    uuid
    ...CategoryBox_category
  }
}

fragment CategoryList_categories on Query {
  productCategoryTreeAll(onlyValid: true) {
    alias
    name
    uuid
  }
}

fragment CategoryList_category on ProductCategoryTree {
  alias
}

fragment HeroCategoryPageHero_category on ProductCategoryTree {
  name
  image_url
  description
}

fragment L1PageCategory_category on ProductCategoryTree {
  name
  description
  alias
  image_url
  ...HeroCategoryPageHero_category
  ...CategoryGrid_categories
  ...CategoryList_category
}

fragment L2PageCategory_category on ProductCategoryTree {
  uuid
  name
  alias
  meta
  additional_html
  description
  image_url
  ...HeroCategoryPageHero_category
  ...CategoryGrid_categories
  children {
    uuid
  }
  faq_items {
    question
    answer
  }
  parent {
    alias
    name
    parent {
      alias
      name
      parent {
        alias
        name
        parent {
          alias
          name
          parent {
            alias
            name
            parent {
              alias
              name
              parent {
                alias
                name
              }
            }
          }
        }
      }
    }
  }
}


Xpelair Simply Silent Standard Square Extractor Fan 100mm - DX100BS

Xpelair-Simply-Silent-Standard-Square-Extractor-Fan-100mm-Dx100bs

Xpelair Simply Silent Timer controlled Square Extractor Fan 150mm - DX150TS

Xpelair-Simply-Silent-Timer-Controlled-Square-Extractor-Fan-150mm-Dx150ts

Xpelair Simply Silent Timer and Humidistat Square Extractor Fan 150mm - DX150HTS

Xpelair-Simply-Silent-Timer-And-Humidistat-Square-Extractor-Fan-150mm-Dx150hts

Xpelair Simply Silent Contour Standard Square Extractor Fan  150mm - C6S

Xpelair-Simply-Silent-Contour-Standard-Square-Extractor-Fan-150mm-C6s

Xpelair Simply Silent Contour Timer controlled Square Extractor Fan  150mm - C6TS

Xpelair-Simply-Silent-Contour-Timer-Controlled-Square-Extractor-Fan-150mm-C6ts

Xpelair Simply Silent Contour Timer and Humidistat controlled Square Extractor Fan  150mm - C6HTS

Xpelair-Simply-Silent-Contour-Timer-And-Humidistat-Controlled-Square-Extractor-Fan-150mm-C6hts

An extractor fan is a beautiful tool for helping to remove undesirable moisture and smells from a building, whether that building is a house or an office. With products available in a variety of shapes and colours to fit all room sizes and locations, our broad collection has got you covered. The proper extractor will assist in preventing unwanted steam from lingering and will help to avoid damp problems.

Xpelair Kitchen Extractor Fans

Related Blog Posts