Netatmo Additional Smart Radiator Valve - Single

Complete your Smart Thermostat or your Starter Pack for district heating with Additional Smart Radiator Valves and take control of all your individual radiators. Thanks to the room-by-room schedule based on your daily routine, heat according to individual room use and save even more energy. Features and Benefits Room-by-room comfort - Fine-tune your comfort temperature room-by-room. Open Window Detection - When the Smart Radiator Valve detects a window is open, it switches off the heating in the room to prevent energy waste. Smart Regulation - The Smart Radiator Valve analyzes the room environment in real-time and adjusts heating according to sunshine level and room use. Manual Boost - When needed, the temperature can be temporarily raised in a specific room for 3 hours. 4 interchangeable colours - Customise your Valve with one of the four colour adhesive strips provided. Mechanics and design - Optimized for energy savings, 2-year battery life. Translucent plexiglass cylinder - Opt for a timeless, minimalist design. Manual temperature adjustment - Turn up the Valve to manually change the temperature setpoint. Real-time temperature - Display the real-time temperature in the room. Easy set-up - Replace your current thermostatic valves with ease even when the radiators are heating. No specific knowledge required. Water cannot leak during installation. Specifications General  Single Pack Thermostatic Valve with Smart operation E-Paper display Translucent plexiglass cylinder designed by Starck Can be customised with one of 4 available colours Temperature can be directly adjusted on the Valves Designed for indoor use only Withstands 95% relative humidity 80x58 mm Colour: White Sensors and measurements Temperature (measurements): Range: 0°C to 50°C (± 0.5°C) Temperature (setpoint): Range: 5°C to 30°C (± 0.5°C) Units: °C only Power 2 AA batteries (2-year lifespan) Setup and compatibility Compatible with hot-water radiators Replace thermostatic valves Works only with a Netatmo Starter Pack for district heating or a Netatmo Smart Thermostat Requirements High-speed wireless internet connection needed. Public hotspots not supported Connectivity specifications Between the Valves and the Thermostat's or Starter Pack's Relay: radio long-range (868 MHz) Free App, No subscription fee - App compatibility iOS 9 minimum required Android 4.2 minimum required PC & Mac through the Webapp What's Included 1 Smart Radiator Valve 6 radiator adaptors (M30x1.5, M30x1.0, M28x1.5x Danfoss RAVL, Danfoss RA, Giacomini) to suit most hot-water radiators 4 colour adhesives 2 AA batteries