Makita Nemesis II SDS Masonry Hammer Drill Bit - 10mm, 315mm, Pack of 1

Anchor your construction project with seamless precision using the 'Makita Nemesis II SDS Masonry Hammer Drill Bit.' Sized at a productive 10mm diameter and an extended 315mm length, this singularly packed drill bit elevates the drilling game in an unparalleled manner. The Nemesis II SDS Plus drill bits from the house of Makita are not only PGM Sichersafe certified but also boast of innovative centering tips and balanced 4-cutter heads. Your struggle of drilling into reinforced concrete ends here; thanks to the extraordinary capability of the Nemesis drill, that makes reinforcing bars a non-issue. Experience the magic of cutting through the hardest natural stone with this superior drill bit. Watch out for the wear mark on the drill bit head! As long as it is visible, you can confidently proceed with creating anchor holes. The symmetrical head geometry of the Nemesis II ensures precision like never before. It is a handy companion for anchor fixings and spot drilling requirements. Appreciably, this single drill bit is capable of producing up to 50% more holes compared to standard rotary hammer drill bits. Its specs are impressive – with a diameter of 10mm and a total length of 310mm - and it is sold as individual units. The Nemesis II SDS drill bit sets new performance standards. It is designed to be 20% faster and 20% stronger, with a formidable 150% extra strength in reinforced concrete. The design allows for increased breaking power and the ability to cut through rebar effortlessly. The rebar chamfers prevent the bit from hooking on to the rebar, providing a smooth drilling experience. The centering tip ensures pinpoint accuracy right from the start. Keep an eye on that wear mark; it's an insightful indicator of your maintaining the certified drilling accuracy of PGM.