A Step-by-Step Guide on How to Clean Extractor Fan Filter in Minutes

Keeping your home clean and well-maintained is not always easy, but it is an important task that should not be overlooked. Cleaning your extractor fan filter is one of the most effective ways to avoid dirt and grease build-up in the kitchen, while also ensuring that air is efficiently circulated throughout the room. If you are looking for an easy and quick way to clean your extractor fan filter, then this guide is for you! In this step-by-step guide, you will learn how to clean your filter in minutes with no hassle. From the preparation process to the actual cleaning, this guide will provide you with all the necessary information you need to make sure your filter is clean and well-maintained. So, let’s get started and learn how to clean your extractor fan filter in minutes!

Preparing the Extractor Fan Filter

The first step to cleaning your extractor fan filter is to prepare the filter for cleaning. In order to do so, follow these steps: First, unplug the fan from the socket. Next, wear rubber gloves when handling the filter. This is to ensure that the filter does not get damaged by your hands. Then, remove the filter from the extractor fan. If you cannot remove the filter from your fan, then it probably is a sealed filter. This means that the filter cannot be removed. In such a case, clean the filter by putting it in a sealable bag with water and dishwashing liquid. Let the filter soak in the bag for a few hours. Afterwards, remove the bag and clean the filter with a soft sponge. The last step is to dry the filter before putting it back in the fan. This way, you will be able to clean the filter without damaging it.

Removing the Filter

The next step in cleaning your extractor fan filter is to remove the filter from the fan. Again, if the filter is a sealed filter and cannot be removed, follow the instructions above to clean the filter without removing it. For fans with removable filters, remove the filter carefully by following these steps: First, lift the filter from its place. Then, put the filter upside down so that all the dirt and grease do not fall back into the fan. Next, place the filter on the floor or a table. You can also put the filter in a sealable bag if you want to contain the dirt inside the bag. This way, you will be able to clean the filter without disturbing the dirt inside the fan.

Cleaning the Filter

extractor fan cleaning filter

Next, you have to clean the filter. This is the most important part of cleaning your extractor fan filter. Follow these steps: First, put the filter in water and dishwashing liquid. Soak the filter in the water and let it sit undisturbed for a few hours. This is to ensure that the filter absorbs enough water to clean it properly. After a few hours, remove the filter from the water and clean it with a soft sponge. In addition to cleaning the filter, this process also helps you gauge the level of filth that the filter has collected. If the sponge is too dirty after cleaning the filter, then it means that the filter is extremely dirty and in need of replacement. After cleaning the filter, dry it using a dry cloth. Make sure the filter is completely dry before putting it back in the fan. This is because moisture might damage the motor of your fan. Finally, put the filter back in the fan and plug it in. The filter will now be clean and ready to filter the air in your home!

Reinstalling the Filter

After cleaning the filter, you now have to reinstall the filter back in the fan. This is a simple process, and you just have to follow these steps: First, place the filter back in its place. Then, put the filter in its original place. If the filter is a sealed filter and cannot be moved, then put the bag with the filter in a new place where the air can circulate properly. Finally, plug in the extractor fan and switch it on. This way, you will be able to clean the filter and get it back in the fan within minutes.

Final Tips

Throughout this guide, you have learned how to clean your extractor fan filter easily and effectively. However, before you start cleaning your filter, make sure that you clean the surrounding area as well. This is to prevent the dirt and grease that you clean from falling back into the area. You can use a vacuum to clean the area. Alternatively, you can also use a cloth to clean the area with water and dishwashing liquid. Make sure the cloth is not too wet so that you do not damage the area. After cleaning the surrounding area, start cleaning the filter. Another important thing to keep in mind is to clean your filter regularly. This way, you will be able to prevent the filter from getting extremely dirty and avoid replacing the filter. Lastly, you can also clean your filter with other cleaning methods. However, you should always start with the method described above to make sure that your filter gets cleaned properly.

Conclusion

Cleaning your extractor fan filter regularly is a great way to keep your home clean and well-maintained. However, cleaning the filter can be a daunting task, especially if you do not know the right way to do it. Luckily, this guide has all the information you need to clean your filter quickly and easily. So, make sure to use this guide to clean your extractor fan filter in minutes!

Leave a Comment