Adhesives and Sealants at Buildiro

No brand matched.

Permanent adhesive (1)

Anti-tamper (2)

Dry (27)Wet or dry (3)

Compact laminate (1)

High bond strength (15)Permanent bond strength (5)Extra strong bond strength (1)

4200ml (1)

Acrylic (6)Flextec Polymer (moisture curing silane terminated polymer (STP) (5)Filled, polyurethane adhesive with adhesion promoters and stabilisers (4)Neoprene (4)Acrylic dispersion (2)

Plastic tub (1)

Heavy duty (1)Medium duty (1)

Square (1)

Concrete effect (1)

Matt (22)Gloss (2)

Flexible (18)Semi-flexible (15)

Easy grip (1)

Nozzle included (4)Comes with nozzle (2)Comes with an application nozzle (1)

PVA (1)

Clean equipment with warm soapy water. (1)

Store in dry conditions between +5°C and +25°C. (6)Store in original containers in a cool, dry place within the temperature range +5°C to +25°C and out of direct sunlight. Protect from frost (4)Store in a frost free environment between + 5°C and + 30°C (3)Keep adhesive in a cool, dry place in original packaging for maximum shelf-life (1)Store in cool, dry conditions (1)

Remove old sealant, Cut cartridge seal & screw on nozzle, Fit cartridge into a sealant gun, Squeeze trigger to apply sealant, Smooth new sealant with a smoothing tool (4)Apply using a sealant applicator gun (3)Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit (3)Completely remove any existing sealant and residue. Then, thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove the nozzle cap and trim the nozzle diagonally to fit the joint width. Screw the nozzle into the cartridge and insert the cartridge into a cartridge gun. Pull the trigger to apply sealant into the joint and ensure that the sealant has good contact with both sides of the joint. Then smoothen the sealant with a sealant finishing tool within 5 minutes. It is recommended to use this in a well-ventilated area (2)Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit. (2)

Plastic (30)Paper (1)

Liquid (16)Gel (6)

Presspack (2)

Low odour (18)Odourless (6)Medium odour (1)

20 kg (11)

Reviver (4)

(3)

Rectangular (2)

FlexJoint (4)Speed seal (2)

Ready for use (12)Ready to use (2)

4 hours (1)

Not fire resistant (15)Fire resistant (2)

Mould resistant (48)Not resistant to mould (21)

Reusable (1)

Living area (27)Kitchen & bathroom (3)

Keep out of reach of children (1)Keep well out of reach of children and pets. Not suitable for food contact. Use with proper ventilation. Avoid contact with skin and eyes. May cause eye/skin irritation with direct contact. In case of direct eye contact, flush with water for 15 minutes and consult physician. Wash hands and skin thoroughly with soap and water after use. If swallowed, seek medical advice immediately and show container label. Toxic to aquatic organisms. Do not empty into drains (1)

Double-sided (1)

22mm (1)41mm (1)L (1)S (1)

Soft Close (2)Standard (2)

Solvent-free (53)Solvented (9)

Multi-purpose (4)Parquet (1)

Masonry, concrete, plaster, chipboard & wood (14)Polyvinyl chloride (PVC) (2)Fabric (1)Foam-backed carpets, carpet tiles, underfelt, flexible foams, fabrics, cork & felt (1)Leather (1)